LPG cylinders are essential for residential, commercial and industrial gas distribution. For distributors, importers and project buyers, selecting a cylinder involves more than choosing capacity. Material, wall thickness, valve configuration, pressure rating, dimensions, operating temperature and branding options all affect handling, filling compatibility and market acceptance.
Vehision currently offers a verified 10 kg steel LPG cylinder for domestic, agricultural and industrial applications. Its published specifications include Q235 or HP295 steel, a 2.3 mm wall thickness, a working pressure of 240 PSI and a test pressure of 480 PSI. Valve configuration, cylinder color and logo printing can also be customized.
An LPG cylinder is a portable pressure vessel used to store and supply liquefied petroleum gas. Because LPG is held under pressure, the cylinder must maintain structural integrity during filling, transportation, storage and repeated use.
Residential distributors commonly supply cylinders for household cooking and gas systems. Commercial users may need them for restaurants, hotels, workshops or small heating systems. Agricultural and industrial users may use LPG for heating, drying, cutting or other controlled fuel applications. The selected cylinder should therefore match the local filling system, valve standard, handling method and market regulations.
Vehision’s 10 kg LPG cylinder is designed for ambient temperatures from -40°C to 60°C. The product page identifies LPG as the filling medium and lists a water capacity of at least 24 liters. Buyers should verify that these conditions match the requirements of the destination market.
Cylinder capacity should be selected according to consumption, refill frequency, transportation distance, storage space and local handling practices. Smaller cylinders are easier to carry and may suit households or markets with frequent refilling. Medium-capacity cylinders can balance portability with longer use. Larger cylinders may reduce refill frequency but need more storage space and appropriate handling equipment.
Vehision’s current model has a nominal LPG capacity of 10 kg. The published empty cylinder weight is approximately 10.5 kg. Its total height is 540±10 mm, and the bottle diameter is 300±1 mm. Gas distributors should compare these measurements with filling lines, delivery vehicles, pallets, storage racks and customer handling requirements.
Buyers should not assume that a popular capacity in one country will automatically suit another market. Local distributors may use different valve connections, cylinder colors, markings, inspection rules and filling equipment. Before confirming a bulk order, verify the cylinder format already accepted by local filling stations and end users.
The following specifications are published for Vehision’s 10 kg model:
| Parameter | Published Specification |
|---|---|
| Cylinder capacity | 10 kg |
| Filling medium | LPG |
| Ambient temperature | -40°C to 60°C |
| Steel material | Q235 or HP295 |
| Wall thickness | 2.3 mm |
| Valve configuration | Customized |
| Working pressure | 240 PSI |
| Test pressure | 480 PSI |
| Water capacity | ≥24 L |
| Cylinder weight | Approximately 10.5 kg |
| Total height | 540±10 mm |
| Bottle diameter | 300±1 mm |
| Color and logo | Customized |
The table should be used as a starting point for procurement. Buyers should also request the applicable drawing, valve details, markings, inspection documents and certification information for the exact order. Pressure-vessel products must be reviewed against destination-country requirements before production and shipment.
Steel and composite LPG cylinders can serve different distribution models. Steel cylinders are widely used in established LPG supply networks because filling plants, delivery systems and inspection practices are often already designed around them. Vehision’s current product is manufactured from Q235 or HP295 steel.
Composite cylinders are generally considered where lower weight, corrosion resistance or easier visual monitoring is important. However, buyers should not compare the two materials only by weight. Valve compatibility, impact performance, inspection procedures, replacement cost, local acceptance and filling-plant compatibility also influence the decision.
For distributors already operating steel-cylinder filling and transport systems, steel cylinders may be easier to integrate. Composite cylinders may be considered for markets where handling weight or corrosion exposure is a major concern. The better option depends on the local distribution model and regulatory environment.
Because Vehision’s referenced page currently provides verified data only for a 10 kg steel cylinder, buyers seeking composite cylinders should request separate technical confirmation. The steel model’s dimensions, pressure values and valve options should not be assumed to apply to a composite product.
Before placing a bulk order, buyers should complete the following checks:
Confirm the intended filling medium and cylinder capacity.
Verify material, wall thickness, working pressure and test pressure.
Match the valve type with local filling equipment and user connections.
Confirm dimensions, empty weight and manual-handling requirements.
Review the operating-temperature range for the destination market.
Verify required markings, labels, serial information and logo placement.
Request the quality, inspection and certification documents applicable to the order.
Confirm packaging, palletization and container-loading arrangements.
Check whether spare valves or replacement parts are needed.
Confirm compliance with local LPG and pressure-vessel regulations.
Buyers should distinguish between appearance customization and safety-critical specifications. Color and logo printing can support distributor branding, but material, valve selection, pressure rating and testing requirements must remain subject to technical and regulatory review.
Provide the required capacity, order quantity, destination country, LPG application, valve standard, preferred material, color, logo requirements and mandatory certification or marking rules.
Yes. Vehision lists the valve configuration as customizable. Buyers should provide the required valve drawing, connection standard or sample details before production.
The current product page lists Q235 or HP295 steel with a wall thickness of 2.3 mm.
The published working pressure is 240 PSI, while the test pressure is 480 PSI for the referenced 10 kg cylinder.
Yes. Vehision lists customized color and logo options for distributor branding and market identification.
Do not compare unit price alone. Review specification consistency, valve matching, documentation, inspection support, branding, packaging coordination and communication throughout production and delivery.
For gas distributors, the right cylinder is one that fits the local filling system, customer usage habits, handling process and regulatory environment. Vehision’s 10 kg steel cylinder provides a clearly defined starting specification, while valve configuration, color and branding can be adjusted for the target market. All final technical and compliance requirements should be confirmed before placing a bulk order.
+86-18565871857
English
